Scan QR code
Attention to Lioncel
Return
FESP 5133 is mainly used in the anti-interference test of magnetic field, and it complies with EN 55103 and MIL-STD-461 E, VG 95377 part 13. According to the characteristics of the current source, a magnetic field of up to 1000 A/m can be generated in a short time. The generated magnetic field is proportional to the coil current. A distance ring allows the precise distance between the coil and the EUT surface to be 50 mm and 100 mm.
Main features :
In some cases (requirements for medium field strength) a known series resistance can be used to measure the voltage across this resistance. The voltage reading that can be easily obtained on the resistance corresponds to the generated magnetic field proportionally. Larger series resistance has greater frequency dependence than inductance (but the efficiency of field strength is reduced).
FESP 5133 can also be used to measure existing magnetic fields. The open-circuit output voltage is directly proportional to the magnetic field strength (the frequency is constant), or directly proportional to the frequency (the magnetic field strength is constant). The output voltage of FESP 5133 should use high impedance measuring equipment. If 50Ω measuring equipment is used, the source impedance of FESP 5133 must be considered for frequencies higher than 10 kHz (207 Ω at 100 kHz, 21 Ω at 10 kHz).
|
Frequency Range |
0-200kHz |
|
Coil turns |
36 |
|
Wire diameter |
1.26 mm Cu (AWG 12) |
|
Maximum coil current |
1 0 A (5 min.) |
|
Nominal coil current |
5 A continuous |
|
Maximum magnetic field strength |
1 385 A/m, 5 minutes |
|
Nominal magnetic field strength |
. 7 0 0 A / m , a continuous |
|
Magnetic field strength, 1A coil current (50mm from the ring) |
138 .5 A/m |
|
Current required for 1 A/m: (50mm from the ring) |
7.22 mA |
|
Magnetic field strength, 1A coil current (the distance ring 10 0mm) |
46.88 A/m |
|
To 1 A / m requires a current from the loop :( 10 0mm) |
21.3 mA |
|
Inner coil diameter |
133 mm |
|
Average coil diameter |
135.5 mm |
|
Empty coil center to measurement plane |
50 mm / 100 mm |
|
Mechanical size specifications |
0.16 mx 0.25 (0.3) m |
|
terminal |
4 mm banana socket or BNC female end |
|
parts：
Video playback：
Shanghai Lioncel Electromagnetic Technology Co., Ltd
CONTACT US：
Shanghai Lioncel Electromagnetic Technology Co., Ltd(headquarters)） Tel：021-56776010 66300383 Fax：021-56775110 Email：sales@emclioncel.com Address：2F, building 5, Changzheng Industrial Park, Lane 1225, Tongpu Road, Putuo District, Shanghai Shenzhen Office Tel：0755-25876847 18688776364 Fax：0755-25876847 Address：Floor 2, modern port office center, building a, film building, Guiyuan Road, Luohu District, Shenzhen Beijing Office Tel：13917575261 Address：Room 328, floor 3, block B, building 22, yard 26, Xihuan South Road, Beijing Economic and Technological Development Zone, Beijing 
Scan QR code
Attention to Lioncel Online store links：
Related website links：http://www.emclioncel.com/index.asp
|
