Front panel mounting interface |
4 x N female RF HV+, RF HV-, 2 x AUX (eg for CurrentClamp) |
Front panel mounting interface |
HV+, HV- |
Rear panel mounting interface |
HV+, HV- |
Material |
aluminum |
weight |
24kg |
Internal dimensions |
480 x 635 x 250 mm |
Dimensions |
505 x 650 x 290 mm |
Shielding performance |
typ.> 100 dB |
Applicable Model |
NNHV 8123-800 |
Interface Description:
There are four RF connectors on the front panel, two are used to measure the interference voltage from HV+ and UV-, and the third and fourth AUX interfaces can be used to connect current probes.
The shielding shell is equipped with conductive gaskets to ensure good shielding performance. Generally, the shielding layer of the shielded cable and the shielding cover are in good contact to form a shield, and the quick connector can ensure the reliable and fast installation of the test cable.
There are four aluminum grounding installation terminals inside the shield to ensure that the LISN can be reliably grounded.
Order information:
Shield |
HVSE 8601 |
A pair of flanges (800A feedthrough) |
Opt. 8601-800 Cable cross-sectional area: 19-27 mm 2 High-voltage cable diameter (in the shield): 120-150 mm HV cable wrench specification: 43 mm |