Products
Products
High-voltage artificial power supply network shield HVSE 8600 Return
Product overview
The HVSE 8600 shielded enclosure is designed to meet the high-voltage LISN test of electric vehicles and hybrid vehicles. Its significance is to enhance the shielding performance of high-voltage LISN. The aluminum enclosure has three quick-locking devices that allow the shield to be opened or closed quickly. The front and rear panels are designed with shielded cables for quick installation.
 The HVSE 8600 shielded enclosure is designed to meet the high-voltage LISN test of electric vehicles and hybrid vehicles. Its significance is to enhance the shielding performance of high-voltage LISN. The aluminum enclosure has three quick-locking devices that allow the shield to be opened or closed quickly. The front and rear panels are designed with shielded cables for quick installation.
Meet the standards:
application area:
technical parameter:

Front panel mounting interface

4 x N female

RF HV+, RF HV-,

2 x AUX (eg for CurrentClamp)

Rear panel mounting interface

HV+, HV-

Material

aluminum

weight

24kg

Internal dimensions

480 x 635 x 250 mm

Dimensions

505 x 650 x 290 mm

Shielding performance

typ.> 100 dB

Applicable Model

NNHV 8123,

NNHV 8123-200,

NNHV 8123-400

  Interface Description:

  There are four RF connectors on the front panel, two are used to measure the interference voltage from HV+ and UV-, and the third and fourth AUX interfaces can be used to connect current probes.

  The shielding shell is equipped with conductive gaskets to ensure good shielding performance. Generally, the shielding layer of the shielded cable and the shielding cover are in good contact to form a shield, and the quick connector can ensure the reliable and fast installation of the test cable.

  There are four aluminum grounding installation terminals inside the shield to ensure that the LISN can be reliably grounded.

 

  Order information:

Shield

HVSE 8600

A pair of flanges (100A feedthrough)

Opt. 8600-100

电缆截面积:6-16 mm2

高压电缆直径(屏蔽罩内):5-9 mm

HV电缆扳手规格:17 mm

一对法兰盘(200A馈通)

Opt. 8600-200

电缆截面积:16-35 mm2

高压电缆直径(屏蔽罩内):9-13 mm

HV电缆扳手规格:22 mm

一对法兰盘(400A馈通)

Opt. 8600-400

电缆截面积:35-95 mm2

高压电缆直径(屏蔽罩内):13-20 mm

HV电缆扳手规格:34 mm

一对blanco法兰盘

Opt. 8600-blanco

一对法兰盘,只有4个通孔在测试侧(2xAUX,RF-HV+和RFHV-)

在供电侧没有插座或馈通。

parts:
Video playback: