Products
Products
STLP9128D Stacked Log Periodic Antenna (80M-3G) Return
Product overview
Linearly polarized laminated log-period broadband antenna with N or 7/16 connector for receiving and transmitting applications. Main purpose: to generate the specified field strength level for the immunity test.

   Linearly polarized laminated log-period broadband antenna with N or 7/16 connector for receiving and transmitting applications. Main purpose: to generate the specified field strength level for the immunity test.

main feature:

       The stacked log periodic dipole antenna is composed of two ordinary log antennas. Excellent characteristics of ordinary logarithm (large bandwidth and flat gain, low SWR). The stacked LP design can be used to maintain the design. The laminated design helps to focus the H-plane pattern to a certain extent. Compared with ordinary LP antennas, the typical gain is increased by 2.5dB. This is especially important for immune tests, where maximum field strength and good field uniformity are required. The beam widths in the E-plane and the H-plane are almost the same, providing the best illumination of the device under test with the least impact of ground reflection.

       In addition, STLP 9128 D's cross-polarity suppression is excellent.


Meet the standards:
application area:
technical parameter:

Nominal frequency range

80 -3000 MHz

Usable frequency range

65 -4000 MHz

polarization

Linear

Pattern type

Orientation

material

aluminum

impedance

50 ohm

Typical standing wave ratio

1.5 (f <3 GHz)

Maximum input power ( 7/16 interface)

2kW (continuous); 3kW (intermittent)

Maximum input power (N interface)

1kW (continuous); 1.5kW (intermittent)

Connector

N female end or 7/16  female end

size

1460  x 1850  x 2000  mm (length * width * height)

weight

8.1 kg

Installation and recommended adapter

22mm diameter tube, AA 9209

parts:
Video playback:

Copyright:Shanghai Lioncel Electromagnetic Technology Co., Ltd (2020)

沪ICP备12035591号